Product
當前位置：首頁 / 產品中心 / 美國安捷倫耗材配件 / 安捷倫色譜耗材配件 / 5190-2293美國原裝安捷倫色譜配件襯管現貨
簡要描述：5190-2293美國原裝安捷倫色譜配件襯管現貨耗材配件*，上海連橋生物科技有限公司授權代理美國安捷倫Agilent全線耗材配件，保證*，價格美麗，常備庫存現貨。
產品型號
廠商性質
更新時間
瀏覽次數
產品分類
| 品牌 | Agilent/安捷倫 | 供貨周期 | 現貨 |
|---|
美國安捷倫原廠原裝耗材配件，上海連橋生物科技有限公司授權代理安捷倫全線耗材配件，適用于衛生保健、科學研究、以及安全和教育領域的客戶提供一系列的實驗室裝備、化學藥品以及其他用品和服務，*，庫存現貨。
美國原裝安捷倫色譜配件襯管現貨
主要經營代理產品：（）原子吸收光譜耗材、液相色譜耗材；美國安捷倫（Agilent）液相色譜耗材；美國沃特世（Waters）液相色譜耗材；德國耶拿（Analytik Jena）：原子吸收光譜耗材；日本島津（SHIMADZU）：液相色譜耗材；美國戴安（DIONEX）離子色譜耗材；美國熱電（賽默飛ThermoFisher）原子吸收光譜耗材；美國瓦里安（Varian）光譜耗材；德國默克（MERCK）試劑、標液系列；美國Nalgene離心管、容器耗材等；韓國大韓磁力攪拌、電動攪拌器、電熱套、加熱板、高溫爐系列；德國肖特實驗室玻璃器皿系列；加拿大博朗全自動固相萃取儀等。
美國原裝安捷倫色譜配件襯管現貨
除此之外，本公司還代理批發銷售其他安捷倫Agilent儀器耗材配件，下面是部分產品的貨號，如果沒有找到需要的，可提供貨號聯系我們給您提供報價
| G2860A | Standard 5973/75 Extended Linearity Appl |
| G3138-65000 | ISIS Tubing kit |
| G3138-65117 | Rotor Seal for Valve,ISIS |
| G3138-65118 | Nut for valve, ISIS, 6/pk |
| G3138-65119 | Ferrule for valve, ISIS, 6/pk |
| G3138-65121 | Mixer for ISIS |
| G3138-65122 | Sample loop, 100 uL, ISIS |
| G3138-65125 | Plastic Tray ISIS |
| G3138-65129 | Plug for Cross Joint, 3pcs. |
| G3138-65138 | Tubing for Gas Line,PTFE,3.0mm ID,5m |
| G3138-65139 | Reducing Union Connector,6mm x 3mm,ISIS |
| G3138-65140 | Reducing Union Connector,6mm x 4mm,ISIS |
| G3138-65141 | Plug for Carrier Gas Connector,3/Pk,ISIS |
| G3138-65144 | Reducing Union connector,8mm x 4mm, ISIS |
| G3138-65157 | Ferrule for 0.25 mm id pump tubing |
| G3138-65158 | ISIS Tubing adapter (ISTD/ripump) |
| G3139-68000 | Microflow neb. PFA(200) w/SPS4 probe kit |
| G3154-65001 | As sciation column for drinking water |
| G3154-65002 | Guard column for AS sciation |
| G3154-90011 | As Sciation Analysis Handbook |
| G3154-96011 | As Sciation Analysis Handbook (JP) |
| G3158-60010 | PFA tube 1/8inch, 2 m |
| G3158-65002 | SS Pi,1/16in,with connector,GC-ICP-MS |
| G3158-65004 | Ferrule kit for GC-ICP-MS Interface |
| G3158-65005 | Graphite ferrule for GC-ICP-MS Interface |
| G3158-65008 | Alignment Boss GC-ICP-MS |
| G3158-65009 | Ball Joint GC-ICP-MS |
| G3158-80060 | Transfer line for GC-ICP-MS Interface |
| G3158-80074 | Torch for GC-ICP-MS Interface |
| G3158-80080 | Pre-heating pi w/connector GC-ICP-MS |
| G3158-80081 | Stainless steel pi, 1/16 in GC-ICP-MS |
| G3158-80150 | Injector assembly, GC-ICP-MS interface |
| G3158-90021 | GC Interface Manual |
| G3160-60015 | Holder for carry tray cover, I-AS |
| G3160-65306 | PFA needle 0.3 mm id, std probe for I-AS |
| G3160-65307 | External rinse bottle 100mL, w/caps, 6/p |
| G3160-65320 | Rinse solution inlet/outlet tubing, I-AS |
| G3160-65321 | Tray Cover,I-AS |
| G3160-65324 | PFA Needle, 0,8 mm ID |
| G3160-65325 | Tubing holder, EK, micro flow neb. |
| G3160-65328 | Drain tube to rinse + drain bottles I-AS |
| G3160-67000 | Drain tube Tygon, 3/32 x 5/32, 5m |
| G3160-80041 | Needle holder for I-AS |
| G3160-80043 | Washing bottle,I-AS |
| G3160-80060 | I-AS tray A, 89 positions for 6 mL vials |
| G3160-80061 | I-AS Tray B, 53 positions for 18mL vials |
| G3160-80062 | I-AS Tray C, 18 positions for 50mL vials |
| G3160-80063 | I-AS tray D, 79x2mL + 10x18mL positions |
| G3160-80064 | I-AS tray E, 79x6mL + 10x18mL positions |
| G3160-80065 | I-AS Tray F, 15 places for 48mm od vials |
| G3160-80066 | I-AS Tray G, 28 positions for 20mL vials |
| G3160-80200 | Serial-USB Converter cable for I-AS |
| G3160-90021 | Integrated Autosampler (I-AS) Manual |
| G3160-96021 | Integrated Autosampler (I-AS) Manl (JP) |
| G3163-20530 | Drawout Plate, 6mm, 5973/5975 |
| G3169-60170 | Anodized Reller Assembly (SST) |
| G3170-20126 | Entrance Lens Assembly (HM) |
| G3170-20430 | CI Source Body - Chamfer |
| G3170-20530 | Lens insulator,597X MSD |
| G3170-20540 | CI Lens Insulator |
| G3170-60171 | 5975C Inert EI 350 Reller Assembly |
| G3170-60172 | 5975C SST EI 350 Reller Assembly |
| G3170-60416 | 5977 CI 350 Reller Heater assembly |
| G3170-80002 | 5975 Calibrant Bulb |
| G3170-80006 | Foreline Pump Exhaust Fitting |
| G3170-80103 | Triple axis electron multiplier, 5975 |
| G3170-80105 | Triple Axis Detector Assy,5975 Ceramic |
| G3182-20580 | Capillary Column Union, Non-deactivated |
| G3182-60581 | UI Ultra Inert Union No Fittings |
| G3182-61580 | Ultimate Union Kit, Deactivated |
| G3182-61581 | Ultimate Union Kit, non-deactivated |
| G3184-60065 | Tee,inert for capillary flow technology |
| G3185-60300 | QuickSwap Restrictor Variety Pack |
| G3185-60362 | QuickSwap Restrictor, 0.100 ID, 4 Pack |
| G3185-60363 | QuickSwap Restrictor, 0.110 ID, 4 Pack |
| G3187-60065 | Union-on-Plate, inert |
| G3199C | Quiet Cover II |
| G3268-80001 | Cr sciation column for drinking water |
| G3270-65035 | Stainless steel tubing, 1/8in od, 6m |
| G3270-67003 | Sampling Cone,Nickel Plated |
| G3270-80024 | Quartz connector tube, dilution, HMI kit |
| G3280-01507 | Interface wrench for Sampling cone |
| G3280-01650 | Omega bias lens for ICP-MS x-lens |
| G3280-20504 | Retaining ring, sampling cone, ICP-MS |
| G3280-20576 | Plug for dilution port (1/8 inch) |
| G3280-20618 | Cell entrance lens, ICP-MS, 1/pk |
| G3280-20628 | Deflect lens, ICP-MS, 1/pk |
| G3280-20633 | Cell focus lens, ICP-MS, 1/pk |
| G3280-20646 | Omega bias lens for s-lens, ICP-MS |
| G3280-20653 | Omega lens for s-lens, ICP-MS |
| G3280-20663 | Tubing for reaction cell gas, 1/pk |
| G3280-20664 | Cell exit lens, ICP-MS. 1/pk. |
| G3280-40103 | Sample tray for ICP-MS, 1/pk. |
| G3280-60077 | Tygon tubing (3m), for ICP-MS |
| G3280-60160 | Ar gas tubing kit,7700x/e + 7900 ICP-MS |
| G3280-60163 | Ar gas tubing kit 7700s, 8800+7900 s/con |
| G3280-60381 | Offset skimmer assembly, 1pk. |
| G3280-60502 | Interface wrench, skimmer cone removal |
| G3280-60555 | Drain tubing assembly for ICP-MS |
| G3280-60580 | Organic solvent introduction kit, ICP-MS |
| G3280-60590 | On-line Int Standard addition kit ICP-MS |
| G3280-60609 | Omega lens for x-lens, ICP-MS, 1/pk |
| G3280-60612 | Extraction lens 1 for x-lens for ICP-MS |
| G3280-60613 | Extraction lens 2 for x-lens for ICP-MS |
| G3280-60615 | Plate bias for ICP-MS |
| G3280-60671 | Offset skimmer tool, ICP-MS, 1/pk |
| G3280-60910 | Maintenance Video/DVD for ICP-MS |
| G3280-67003 | Basic Supplies 77/79/8800, Inland 45 oil |
| G3280-67004 | Comprehensive Supplies 7700x+e/8800 |
| G3280-67007 | Comprehensive Supplies 7700s/8800semicon |
| G3280-67022 | Carrier/Make-up/Dilution gas tubing |
| G3280-67023 | Plasma/Aux gas tubing with inner sleeve |
| G3280-67035 | Extraction-Omega lens assy for s-lens |
| G3280-67037 | Screw and spacer kit for x-lens, ICP-MS |
| G3280-67038 | Screw and spacer kit for s-lens, ICP-MS |
| G3280-67039 | Extraction-Offset lens assy for x-lens |
| G3280-67044 | Screw/Spacer/O-ring for cell, ICP-MS |
| G3280-67045 | Octopole assembly, ICP-MS, 1/pk |
| G3280-67046 | Manual vent valve for ICP-MS, 1/pk |
| G3280-67062 | T-Joint with Earth block for ICP-MS, 1/p |
| G3280-67085 | Comprehensive Supplies 7700e, Inland 45 |
| G3280-67110 | Spacer (deflect/plate b.), 4/pk |
| G3280-67221 | Basic Supplies 77/78/79/88/8900, AVF 60 |
| G3280-80503 | Scial spray Chamber (long arm), ICP-MS |
| G3280-90008 | 7700 Hardware Maintenance Manual |
| G3280-96008 | 7700 ICP-MS H/ware maintenance manual-JP |
| G3288-80000 | As sciation column for ICP-MS |
| G3292-80010 | Poly-Clear fluid (for G3292A Chiller) |
| G3292-80109 | Fluid Filter (for G3292A Chiller) |
| G3292-80112 | Air Filter for G3292A Chiller |
| G3430-60018 | Cryogenic Valve, Liquid N2 |
| G3431-60680 | FID Ignitor Cable |
| G3432-60220 | TCD Base Assembly - Tested |
| G3433-63100 | Micro ECD Mug Adapter Weldment |
| G3434-60806 | NPD Blos bead |
| G3435-60330 | FPD+ Exit Tube Assembly |
| G3435-60350 | Packed-Capillary Adapter Assembly |
| G3436-67000 | FPD+ Dual PM Kit |
| G3440-20022 | Inert Draw Out 9.0mm, Inconel |
| G3440-60234 | UM+ Tube 1/16 in 0.020 in x 1000mm CPM |
| G3452-60570 | Cap Inlet Shell Weldment,7890, Inert |
| G3452-60586 | Capillary Insert Weldment, Inert, 7890 |
| G3452-60730 | Split/Splitless Inlet Insert w/Vent Full |
| G3452-60835 | Septum Retainer Nut for Transfer Line |
| G3480-67585 | 7890 Insert Weldment Assembly, Valves |
| G3510-20018 | Column Nut Adapter - Graphite |
| G3660-90003 | 8800 ICP-MS Hardware Maintenance Manual |
| G3666-20391 | Blank plug for dilution port, PTFE, 8900 |
| G3666-20404 | Omega lens 8900 ICP-MS with s-lens, 1/pk |
| G3666-20405 | Omega bias lens, 8900 with s-lens, 1/pk |
| G3666-40104 | Sample tray for 8900 Series ICP-MS, 1/pk |
| G3666-60301 | Skimmer base assy, 8900 with x-lens, SUS |
| G3666-60302 | Extraction lens 1, 8900 ICP-MS w/ x-lens |
| G3666-60303 | Extraction lens 2, 8900 ICP-MS w/x-lens |
| G3666-60311 | Skimmer base, brass, for 8900 w/x-lens |
| G3666-60401 | Skimmer base assy, 8900 w/s-lens, brass |
| G3666-60402 | Extraction lens 1, 8900 ICP-MS w/s-lens |
| G3666-60403 | Extraction lens 2, 8900 ICP-MS w/s-lens |
| G3666-60502 | Extraction lens 1 for m-lens for ICP-MS |
| G3666-60503 | Extraction lens 2 for m-lens for ICP-MS |
| G3666-60601 | Skimmer base assy, 8900 w/retro-s, brass |
| G3666-67038 | Screw + spacer kit, 8900 with s/m/c-lens |
| G3666-67044 | Screw/Spacer/Oring for 8900 non-AA cell |
| G3666-67045 | Octopole assembly, 8900 with axial accel |
| G3666-67046 | Octopole assembly 8900 w/out axial accel |
| G3666-67141 | ORS cell assembly, 8900 with axial accel |
| G3666-67142 | ORS cell assembly 8900 w/out axial accel |
| G3666-67300 | Extraction-Omega lens assy for x-lens |
| G3666-67400 | Extraction-Omega lens assy for s-lens |
| G3666-67500 | Extraction-Omega lens assy for m-lens |
| G3666-67600 | Extraction-Omega lens assy for c-lens |
| G3690A | Configurable supplies kit for 7700/8800 |
| G3690A | Add Ni sampling cone for x-lens, 1/pk |
| G3690A | Add Ni plated sampling cone, x-lens,1/pk |
| G3690A | Add Pt sampling cone for s-lens, 1/pk |
| G3690A | Add Ni skimmer cone for x-lens, 1/pk |
| G3690A | Add Pt skimmer cone for x-lens, 1/pk |
| G3690A | Add Inland 45 oil + filter, Edwards pump |
| G3690A | Add AVF 60 SHCE oil + filter, MS40+ pump |
| G3850-60021 | LE-EI Filament |
| G3850-80650 | Exhaust Deflector Assembly, GC/QTOF |
| G3870-20440 | Extraction Source Body |
| G3870-20444 | Extraction Lens, 3mm |
| G3870-20445 | Insulator, Extraction Lens Ring |
| G3870-20448 | Extraction Lens, 6mm |
| G3870-20449 | Extraction Lens, 9mm |
| G3870-20530 | Extraction Lens Insulator |
| G3870-67171 | 5977 Extraction EI 350 Reller Assembly |
| G3870-67172 | 5977 SST EI 350 Reller Assembly |
| G3870-67173 | 5977 EI Inert 350 Reller Assembly |
| G3970A | Inert Flow Path Upgrade kit, 7890 |
| G4204-40000 | Clamp for in-line filter |
| G4204-40005 | EK seal for inlet weaver assembly |
| G4204-60004 | Outlet filter 1290 quat-pump |
| G4204-60022 | Inlet Valve 1290 quat-pump |
| G4204-68000 | Switchable Jet Weaver Mixer Upgrade Kit |
| G4204-68035 | Jet Weaver Mixer Kit V35 Quat/Flex |
| G4204-68100 | Jet Weaver Mixer Kit V100 Quat/Flex |
| G4204-68380 | Jet Weaver Mixer Kit V380 Quat/Flex |
| G4204-81090 | Low pressure mixer assembly |
| G4208-68700 | USB Memory Stick for G4208A, |
| G4212-60007 | Max-Light Cartridge Cell 60mm |
| G4212-60008 | Max-Light Cartridge Cell 10mm |
| G4212-60011 | Max-Light Cartridge Test Cell |
| G4212-60022 | Pressure relief valve |
| G4212-60032 | Max-Light Cartridge Cell 3.7 mm HDR |
| G4212-60038 | Max-Light Cartridge Cell 10 mm ULD |
| G4212-68001 | Agilent Inline Pressure Relief Valve Kit |
| G4216-68711 | Large volume injection kit for 1290 |
| G4218-20000 | Standard Flow Nebulizer |
| G4218-20001 | Semi Micro Flow nebulizer |
| G4218-20004 | RRLC Nebulizer for G4218A ELSD detector |
| G4218-40000 | Nebulization chamber,glass |
| G4218-40010 | Black plastic nut, 13mm dia-glassware |
| G4218-40011 | Black plastic nut, 22mm dia-glassware |
| G4218-40100 | Drain tube with stainless steel fitting |
| G4218-40110 | Black exhaust tube,2.5m |
| G4218-40150 | Cartridge 0.01 um for gas regulator |
| G4218-40220 | Pneumatic tube with SS fitting,check |
| G4218-60100 | Gas regulator w filter 0.01um, manometer |
| G4218-68010 | Seal kit for nebulization chamber |
| G4220-20001 | Spacer Fitting |
| G4220-20020 | Internal gold seal for 1290 outlet valve |
| G4220-60006 | Jet Weaver, 35 ul/100 ul |
| G4220-60007 | Bottle Head Assembly |
| G4220-60012 | Jet Weaver 380 ul |
| G4220-60015 | Support ring integrated for 1290 pump |
| G4220-60016 | Seal holder integrated for 1290 pump |
| G4220-60017 | Bottle Head Assembly Ultra Clean Tubing |
| G4220-60022 | Inlet Valve |
| G4220-60028 | Outlet Valve 1290 Infinity pump |
| G4220-60035 | Tubing kit 140mm, 2/pk |
| G4220-60070 | Tubing Kit 140mm - Ultra Clean Tubing |
| G4220-60117 | Bottle Head Assembly UCT StreamSelect |
| G4220-60122 | 1290 Infinity inlet valve ty N |
| G4220-60128 | 1290 Infinity outlet valve ty N |
| G4220-63010 | Support ring 1290 InfinityLC w/seal wash |
| G4220-68070 | Ultra Clean Tubing Kit for G4220A |
| G4220-87000 | Capillary interconnect assembly |
| G4226-60021 | Micro Vial Tray |
| G4226-60301 | SST Cap. 0.17mm ID 160mm pre-swaged |
| G4226-60310 | Loop assembly |
| G4226-67001 | Door repair kit for 1290 sampler |
| G4226-68735 | PM KIT for HiP Sampler G4226A |
| G4226-68740 | PM Kit G4226A, low disrsion |
| G4226-87012 | Seat assembly 0.12mm 1290 Infinity LC |
| G4226-87030 | Seat Assembly ULD for G4226A |
| G4226-87201 | Needle Assembly |
| G4226-87211 | Needle Assembly ULD |
| G4236-60010 | 2D-LC Pressure Release Kit |
| G4240-23705 | Rotor, Inner Valve, 3grooves, Chip LC |
| G4240-25206 | Rotor Outer Valve, 5grooves, Chip LC |
| G4240-43200 | EK fitting,scial for Chip-LC |
| G4240-64025 | mAB-Glyco Enablement Kit |
| G4240-87300 | Fused Silica/EK Capillary, 15um 90cm |
| G4240-87301 | Fused Silica/EK Capillary 25um,105cm |
| G4240-87302 | Fused Silica/EK Cap 100um,100cm |
| G4240-87303 | Fused Silica/EK Cap 75um,100cm |
| G4240-87304 | Fused Silica/EK capillary 50um 50cm |
| G4240-87309 | EK capillary, 25um x 105cm |
| G4240-87310 | EK Capillary, 25um x 10cm |
| G4267-60300 | Loop cartridge 20ul,right |
| G4267-60301 | Loop 20ul Left Dual-Needle |
| G4267-60311 | Loop 20ul right Dual-Needle |
| G4267-60400 | Loop cartridge 40 ul, right |
| G4267-60401 | Loop 40ul Left Dual-Needle |
| G4267-60411 | Loop 40ul right Dual-Needle |
| G4267-60500 | Loop cartridge 100 ul, right |
| G4267-60501 | Loop 100ul Left Dual-Needl |
| G4267-60511 | Loop 100ul Right Dual-Needle |
| G4267-87012 | High Pressure Needle Seat 0.12mm EK |
| G4267-87020 | High Pressure Seat Assembly 0.075mm |
| G4267-87201 | Needle Assembly for G7167 Multisampler |
| G4267-87210 | Needle assembly 900ul for G7167 |
| G4277-60602 | DLW-2 Loop Assembly |
| G4280-60004 | Dual channel gradient valve |
| G4280-60029 | Solvent selection valve for 1120 |
| G4280-60034 | Tubing,PTFE,16cm with fittings,3mm od |
| G4280-60500 | Passive inlet valve replacement kit |
| G4280-67304 | LC pump connecting tube,PTFE |
| G4280-68708 | Solvent selection valve kit f. 1120/1220 |
| G4280-68710 | PM Kit 1120 Compact LC,Manual Injector |
| G4280-68730 | PM Kit 1120 Compact LC,Auto Injector |
| G4280-68750 | PM Kit for 1220 LC with manual |
| G4280-68770 | PM Kit for 1220 LC with ALS |
| G4280-81300 | Capillary,damr 1,SS,0.6mm id |
| G4280-81301 | Capillary,damr 2,SS,0.6mm id |
| G4301-20101 | Piston SFC Booster |
| G4301-20200 | Seal SFC Booster |
| G4301-60056 | Capillary SFC BoosterPump out |
| G4301-60100 | Flow cell for 1260 Infinity SFC |
| G4301-60120 | Wash Pump Check Valve PKG OF 2 |
| G4301-60130 | Wash Pump Piston Assy |
| G4301-60140 | Wash Pump Seal Kit for 1260 Infinity SFC |
| G4301-60150 | Wash Pump Transfer Line |
| G4301-60160 | Wash Pump Transfer Line (EVO) |
| G4301-60200 | Flow Cell SFC-LD |
| G4301-60210 | Check Valve Cartridge; 0.125 ball |
| G4301-60230 | Check Valve Holder (A5) |
| G4301-60240 | Check Valve Gasket, 5pk |
| G4301-60241 | Check Valve Gasket Outlet |
| G4301-60250 | A5 Pump Seals, for 1260 Infinity SFC,2pk |
| G4301-60260 | Booster Pump Head for 1260 Infinity SFC |
| G4301-60300 | CO2 Supply Line for 1260 Infinity SFC |
| G4301-60310 | Pump Transfer Line for 1260 Infinity SFC |
| G4301-60320 | Return Transfer Line |
| G4301-60350 | Tee for Valco for 1260 Infinity SFC |
| G4301-60501 | Low Disrsion Nozzle Assembly |
| G4302-60066 | Inlet Valve for SFC Pump |
| G4309-68000 | SFC MS connection Kit |
| G4309-68715 | SFC/MS Splitter Kit |
| G4332-60220 | 7820 TCD Support Part |
| G4352-60570 | Deactivation Cap Shell Weldment |
| G4513-20561 | Mounting post for 7693 and 7650 ALS |
| G4513-40525 | Needle support insert, standard, 7693 |
| G4513-40529 | Needle support insert, on column, 7693 |
| G4514-60710 | Gripr finger caps for 7693 |
| G4514-67505 | Vial rack kit, 3 Racks, 3 white labels |
| G4522-60500 | Metal Vial Rack Assy. |
| G4525-60701 | Vial rack label kit for 7693 |
| G4556-60019 | 7697A Tray Rack |
| G4556-60125 | 7697A Sample Probe, Deactivated |
| G4556-67010 | Leak Test Kit |
| G4556-67011 | 7697A Standard PM Kit |
| G4556-67012 | 7697A Enhanced PM Kit |
| G4556-80101 | Sample loop, Headspace 0.025 ml, inert |
| G4556-80102 | Sample loop, Headspace 0.05 ml, inert |
| G4556-80103 | Sample loop, Headspace 0.10 ml, inert |
| G4556-80105 | Sample loop, Headspace 0.50 ml, inert |
| G4556-80106 | Sample loop, Headspace 1.00 ml, inert |
| G4556-80107 | 2 mL Sample Loop, 7697A Headspace, Inert |
| G4556-80108 | Sample Loop, Headspace 3.00 ml, inert |
| G4556-80109 | Sample loop, Headspace 5.00 ml, inert |
| G4556-80126 | Sample Loop, HS, Cert. 1.00 mL, inert |
| G4556-80128 | Sample Loop, HS, Cert. 3.00 mL, inert |
| G4556-90500 | 7697A Tray labels |
| G4580-68300 | Intuvo Exhaust Kit |
| G4581-20006 | Guard Chip Compression Bolt |
| G4581-20543 | M3X0.5 mm, 6 mm LONG, WS2 COATED |
| G4581-60031 | Intuvo Inlet Chip |
| G4581-60032 | Intuvo D1 Chip |
| G4581-60033 | Intuvo D2-MS Chip |
| G4581-60260 | Intuvo Compression Bolt |
| G4582-20085 | S/SL Compression Bolt |
| G4583-20005 | Detector Tail Compression Bolt |
| G4583-60331 | Intuvo FID or TCD Tail |
| G4583-60333 | Intuvo ECD Tail |
| G4583-60334 | Intuvo NPD Tail |
| G4583-60335 | Intuvo FPD Tail |
| G4583-60336 | Intuvo XCD Tail |
| G4583-60621 | Intuvo D2 Connector Chip |
| G4585-60523 | S/SL Turn Top Assy Intuvo |
| G4586-20027 | MMI Compression Bolt |
| G4587-60565 | Intuvo S/SL Guard Chip 2/pk |
| G4587-60575 | Intuvo S/SL Jumr Chip |
| G4587-60665 | Intuvo MMI Guard Chip 2/pk |
| G4587-60675 | Intuvo MMI Jumr Chip |
| G4588-60302 | Intuvo D1 Post Column Backflush Chip |
| G4588-60322 | Intuvo D2-MS Post Column Backflush Chip |
| G4588-60402 | Intuvo D1-D2 Splitter Chip, 1:1 |
| G4588-60502 | Intuvo D1-MS Splitter Chip, 1:1 |
| G4588-60522 | Intuvo D1-MS Splitter Chip, 7:1 |
| G4588-60601 | Intuvo Inlet Splitter Chip |
| G4588-60701 | Intuvo Mid Column Backflush to D1 Chip |
| G4588-60721 | Intuvo Mid Column Backflush to D2 Chip |
| G4590-60009 | Intuvo Swaged MS Tail |
| G4590-60109 | Intuvo Swaged HES MS Tail |
| G4591-20320 | FID Jet, 0.11 inch ID, For Intuvo GCs |
| G4594-81000 | NPD Raised Jet Weldment |
| G4911-01201 | Joint holder for nebulizer pump, ICP-MS |
| G4911-20021 | ri pump tubes adapter (for 2.29mm id) |
| G4911-60011 | Tray for ISIS used with ICP-MS |
| G4911-67001 | Comprehensive spares kit for ISIS-DS |
| G4911-68201 | Preconfigured kit, ISIS Auto-dilution |
| G4911-68202 | Preconfigured kit ISIS Discrete sampling |
| G5611-21503 | Bio-inert piston seal |
| G5611-26210 | Bio-inert seal keer |
| G5611-60016 | Seal holder for Bio inert pump |
| G5611-60025 | Bio-inert active inlet valve |
| G5611-60062 | Bio-Inert Purge Valve long |
| G5611-60064 | Bio-Inert Purge Valve short |
| G5611-60067 | Bio-inert outlet ball valve |
| G5611-63010 | Bio-inert support ring |
| G5611-68741 | PM kit for Bio-inert quaternary pump |
| G5615-60005 | Bio-inert FLD flow cell |
| G5615-60017 | Max-Light Cartridge Cell 60mm BIO |
| G5615-60018 | Max-Light Cartridge Cell 10mm BIO |
| G5615-60022 | Bio-inert standard flow cell, RFID tag |
| G5615-87302 | Capillary PK 0.17 x 210mm SL/UB |
| G5615-87331 | Capillary Holder Cell 0.17mm BIO |
| G5664-68712 | Analytical Tubing Kit ID0.25mm PTFE-ESD |
| G5667-40500 | Tool for needle adjustment |
| G5667-68711 | Multi Draw Kit BIO, 400bar |
| G5667-68735 | PM Kit for the Bio-Inert Sampler G5667A |
| G5667-87200 | Bio-inert needle assembly |
| G5668-60500 | Bio-inert Sample Loop 100uL for G5668A |
| G5668-68730 | PM Kit Bio-inert Multisampler G5668A |
| G5668-87017 | Bio Seat ID 0.17mm for G5668A |
| G5668-87200 | Needle Bio-Sampler |
| G6011A | Quiet Cover MS for MS40 Pump |
| G6012A | Quiet Cover DS |
| G6014-68000 | Install kit, IDP3 to G6014 Quiet cover |
| G6014B | Quiet Cover for GCMS |
| G6301-80004 | Ultivo Ion Injector |
| G6500-60701 | ITEX-II Tenax Trap, TA 80/100, 3 pieces |
| G6500-84003 | 10 Pcs O-Ring for PAL SyrHS2.5ml |
| G6500-88005 | Injection unit tension cord black, 280mm |
| G6500-88014 | Tension Cord, for GC/HTC Needle Guide |
| G6500-88016 | PAL Lub Kit with Brush |
| G6500-88088 | CTC PAL Autosampler PM Kit |
| G6600-60034 | Ceramic Tube Package,for SCD(before 8/95 |
| G6600-60035 | Ceramic Tube Kit for SCD/NCD SS Burner |
| G6600-60037 | Ceramic Tube Kit for SCD DP Burner |
| G6600-60038 | Ceramic/Quartz Tube Kit for NCD DP Burnr |
| G6600-60102 | No PT Screen Quartz Tube of NCD Burner |
| G6600-67007 | 12 Month PM Kit, RV5 Oil Pump for XCD |
| G6600-67008 | 12 Month PM Kit, Dry Piston Pump for XCD |
| G6600-80018 | Spare Column Nut and Ferrule kit |
| G6600-80042 | Replacement Oil Coalescing Filter |
| G6600-80043 | Oil Mist Filter for RV5 pump;SCD/NCD |
| G6600-80044 | Replacement Oil Coalescing Filter |
| G6600-80045 | Replacement Odor Filtration Element |
| G6600-80050 | O-Ring, 1.614 inch ID, Size 2-030 |
| G6600-80051 | O-Ring, 1.301 inch ID, Size 2-027, Black |
| G6600-80063 | Dual Plasma Quartz Tube for NCD |
| G6600-85000 | Ozone Destruction Chemical Trap;SCD/NCD |
| G6600-85001 | Mobil 1 Synthetic Oil |
| G6600-85002 | Oil,Edwards Ultragrade,1L |
| G6696A | IDP-3 Scroll Pump for Turbo 597X |
| G6697A | IDP-10 Upgrade Kit for GC/QQQ |
| G6876-60002 | Sample holder 8in round Cary7000 UMS/UMA |
| G6876-60003 | Sample holder 1in round Cary7000 UMS/UMA |
| G7000-20026 | Entrance Lens Assy, Extended |
| G7000-20444 | Extractor Lens, 3mm, for 7000B QQQ |
| G7000-20446 | Extractor Lens, 6mm, for 7000B QQQ |
| G7002-20008 | Finger Grip, 7010 |
| G7002-20019 | Filament Block |
| G7002-20061 | Extractor Lens, 3mm, 7010 |
| G7002-20064 | Extractor ALN Spacer Lens, 7010 |
| G7002-20065 | Entrance Lens for 7010 |
| G7002-20068 | Ion Focus lens, 7010 |
| G7002-20074 | Lens Insulator Enhanced, 7010 |
| G7002-20083 | M2-0.4 x 12 Lg. Crest-Cup, Gold Plated |
| G7002-20084 | Source Body 5.0mm Diameter, 7010 |
| G7002-20090 | Post Extractor Lens 2, 7010 |
| G7002-20104 | Post Extractor Lens 1, 7010 |
| G7002-20105 | Extractor Lens, 4mm |
| G7002-20109 | Screw, M2X6 Pan Head Torx, Gold-Plated |
| G7002-20126 | Lock Ring Lens Insulator |
| G7002-60001 | Filament Assembly, 7010 |
| G7002-60053 | Source Mount Assembly |
| G7002-67057 | Reller Assembly, Service |
| G7002-80103 | Electron Multiplier |
| G7004-67023 | IDP-10 Tip Seal Replacement Kit |
| G7004-67026 | IDP-10 Tip Seal only |
| G7005-60061 | Filament,high temrature EI for GCMS |
| G7005-60072 | CI Filament- 2PK |
| G7005-60170 | RIS Probe Maintenance Kit |
| G7005-80000 | Alloy CI Filament |
| G7077-60566 | GCMS Tool Kit and cleaning supplies |
| G7077-67018 | IDP3 Tipseal Maintenance Kit |
| G7100-60002 | Capillary cassette |
| G7100-60007 | Electrode assemb. standard for G7100only |
| G7100-60033 | Electrode assy short for G7100 only |
| G7100-60150 | Alignment interface for ext cap 25um id |
| G7100-60210 | Alignment interface for std cap 50um id |
| G7100-60230 | Alignment interface for ext cap 50um id |
| G7100-60310 | Alignment Interface for std cap 75um id |
| G7100-60330 | Alignment interface for ext cap 75um id |
| G7100-60400 | Alignment interface CE-MS cap 360um OD |
| G7100-62700 | 260nm Detector Filter Assembly |
| G7100-68705 | Agilent CE system accessory kit |
| G7100-68723 | High Sensitivity Cell Kit |
| G7100-68750 | 280nm cIEF Filter |
| G7104-68000 | Quat. Pump In-Line Filter upgrade kit |
| G7104-68741 | PM Kit for LL/EM Heads (Quat. Pumps) |
| G7111-60061 | Purge Valve short with PTFE frit |
| G7115-60001 | Flowcell for MWD+DAD, 3mm path length |
| G7115-60002 | Flowcell for MWD+DAD, 0.3mm path length |
| G7115-60003 | Flowcell for MWD+DAD, 0.06mm path length |
| G7116-60006 | Divider Assembly-MCT |
| G7116-60009 | Bio-inert Quick Connect Heat Exchanger |
| G7116-60015 | Quick-Connect Heat Exchanger Standard |
| G7116-60021 | Quick-Connect Heat Exchanger ULD |
| G7116-60031 | Quick-Connect Heat Exchanger High Flow |
| G7116-60041 | Bio-inert Quick Connect Heat Exchanger |
| G7116-60051 | Quick-Connect Heat Exchanger Large ID |
| G7116-60061 | Quick-Connect Heat Exchanger Large ID HF |
| G7116-68003 | Column Holder Lamella 2/PK for Inf. II |
| G7120-60007 | Bottle Head Assembly |
| G7120-60017 | Bottle Head ay UCT long |
| G7120-68070 | Ultra Clean Tubing Kit for Infinity II |
| G7120-68741 | PM Kit for LL/EM Heads (Binary Pump) |
| G7122-60007 | Bottle Head Assembly-2.28m |
| G7129-60000 | External Tray for 5 x 2ml Vials |
| G7129-60010 | Drawer for 66 x 2 ml Vials |
| G7129-60110 | Drawer for 18 x 6 ml Vials |
| G7129-60300 | Sample Loop 20ul |
| G7129-60400 | Sample Loop 40ul |
| G7129-60500 | Sample Loop 100ul |
相關文章
上一篇
